AS 9100 was developed by the international Aerospace Industry quality team. It is a Quality Management System Standard and is built on the ISO 9001 Quality management system, with supplements and comments specific to the aerospace and defense industries. There are some standards associated with AS 9100. These include the 9110 designed for repair and maintenance organizations and the 9120 designed for distributor stakeholders. The 9100 standard was published as ‘AS 9100’ in America, ‘EN 9100’ in Europe and ‘JIS Q 9100’ in Asia Pacific.
It is applied to organizations that design, develop, manufacture aerospace and defense products, and provide maintenance, spare parts and post-delivery support for their own products. Although this standard was developed for the aerospace and defense industry, it can be used in other industries.
Having AS 9100/9110/9120 certifications will provide evidence that your products and services meet the demand profit expectations and standards of the aerospace and defense industries. This will demonstrate that you are acting in accordance with internationally agreed and recognized practices, and national IAQG documents can be purchased from the following sites.
Benefits:
- Having internationally agreed and well-known quality management system practices in the aviation, space and defense sectors,
- Being eligible for inclusion in the Online Aerospace Industry Supplier Information System database, OASIS (Online Aerospace Supplier Information System),
- Gain the ability to speak a common language in order to do business with customers and suppliers around the world
- Ensuring efficiency and effectiveness,
- Providing continuous and systematic improvement in quality,
- To present excellence to customers and other stakeholders.
Our company AS 9100 Aerospace Industry Quality Management System is honored to assist in carrying out the necessary guidance and guidance studies. After the proposal sent by our company is approved, your company’s gap analysis and field work is carried out.
Legislative and regulatory screening is performed to review legal compliance. Customer requests are evaluated. The scope of the organization is determined. Risk analysis is carried out in line with this scope. The current status of your organization is analyzed. It is presented to the company management as a report.
A structure suitable for your organization is planned and established. The conformity of the established structure is checked at certain intervals. It is reviewed in the risk analysis. The situation is reported to the top management. Necessary corrections are made. After making sure that the system of the organization is installed, the audit process is expected from the Certification firm chosen by your organization.
As a result of the audit, it is ensured that nonconformities are closed. After the document is received, the consultancy service is completed. The process of leaving the company is carried out by obtaining a reference letter.
AS- 9100, “Quality Management Systems Requirements for Aerospace and Defense Organizations”:
This document standardizes quality management system requirements to the greatest extent possible and can be used by organizations worldwide at all levels of the supply chain. Its use should result in better quality, cost and delivery performance through reduction or elimination of the organization’s unique requirements, effective implementation of the quality management system, and better application of good practice. While primarily developed for the aerospace and defense industries, this standard can also be used in other industry sectors when a quality management system with additional requirements over an ISO 9001 system is required.
AS- 9110, “Quality Management Systems – Requirements of Aviation Maintenance Organizations”:
This document standardizes quality management system requirements to the greatest extent possible and can be used by organizations worldwide at all levels of the supply chain. Its use should result in better quality, timing and cost performance through reducing or eliminating organization-specific requirements and broader application of good practice. While primarily developed for civil and military aviation industry organizations providing maintenance services, this standard can also be used in other industry sectors when a quality management system with additional requirements is required according to the ISO 9001 system.
AS-9120, “Requirements for Quality Management Systems Aerospace and Defense Distributors”:
This standard is used by organizations that supply parts, materials and assemblies and sell these products to a customer in the aerospace and defense industries. This includes organizations that supply products and divide them into smaller quantities, including those that coordinate a customer or a regulatory-controlled action on the product. This standard is not intended for organizations that maintain or repair products, or organizations that do business that affects or may affect product characteristics or conformity.
The IAQG standards outlined below can assist organizations in developing or improving their quality management systems, processes or activities.
AS- 9101, “Quality Management Systems – Audit Requirements for Aerospace and Defense Organizations”:
This standard defines the requirements for the preparation and conduct of the audit process, as well as defines the content and composition of compliance audit reports. Process effectiveness to 9100 series standards, organization’s QMS, and customer and legal/regulatory requirements.
AS-9102, “Aerospace First Article Inspection Requirement”:
This document standardizes FAI process requirements to the highest possible level and can be used by organizations worldwide to provide a consistent process and documentation requirements for aviation verification at all levels of the supply chain.
The use of a space and defense product should result in better quality, timing and cost performance through the reduction or elimination of organization-specific requirements and broader application of good practice. Developed primarily for the aerospace and defense industry, this standard is also for other industry sectors where a Standardized FAI process is required.
AS- 9103, “Management of Variation of Basic Properties”:
This document standardizes the requirements for “key characteristic” identification, control, documentation and approval for the industry. Establishing common requirements for use by organizations at all levels of the supply chain should result in the elimination or reduction of the organization’s unique requirements and improved quality and safety and reduced costs due to the resulting variation in these multiple expectations.
AS-9107, “Direct Delivery Authorization Guide for Aviation Companies”:
This document provides guidance to a manufacturing organization and a design organization on how to comply with direct distribution authorization, including appropriate regulatory requirements.
AS- 9114, “Direct Ship Guide for Aviation Companies”:
This document standardizes the requirements for direct shipping of a supplier from an approved manufacturer to a customer of an approved manufacturer and was originally produced as a joint effort between the Federal Aviation Administration (FAA) and IAQG. Establishing common expectations for use by organizations at all levels of the supply chain should result in improved quality and safety and can be reduced by eliminating or reducing organization-specific requirements and the variation inherent in this multivariate. expectations.
AS- 9115, “Quality Management Systems – Requirements for Aerospace and Defense Organizations – Transferable Software”:
This document supplements the 9100 standard requirement for deliverable software and includes quality management system requirements for organizations that design, develop, and/or manufacture deliverable software. Services for the aerospace, aerospace and defense industries. This includes software used in the development and maintenance of deliverables and services as needed. Deliverables can be stand-alone, embedded, mobile application or installed on a target computer.
AS- 9116, “Aviation Series – Notification of Change (NOC) Requirements”:
This document was created to ensure uniform submission of change notices and/or approval at any level within aerospace and defense or when called upon by guidance. Industrial. This standard can be called a stand-alone requirement or used in conjunction with AS / EN / JISQ 9100 series standards (eg 9100, 9110, 9120).
AS- 9131, “Quality Management Systems – Aviation – Nonconformity Documentation”:
This document standardizes the requirements for data definition and documentation that is not industry-appropriate. Establishing common requirements for use by organizations at all levels of the supply chain should result in improved quality and safety and reduced costs as the organization’s unique requirements are eliminated or reduced and the variation inherent in this multiple variable is eliminated. expectations.
AS- 9132, “Data Matrix Quality Requirements for Part Marking”:
This document standardizes the data matrix quality requirements for part marking for industry. Establishing common requirements for use by organizations at all levels of the supply chain should result in improved quality and safety and reduced costs as the organization’s unique requirements are eliminated or reduced and the variation inherent in this multiple variable is eliminated. expectations.
AS- 9133, “Qualification Procedure for Aviation Standard Products”:
This standard defines a system for the qualification of standard products for aerospace and defense applications. Defines the principles that must be followed to carry out product qualification; Applied in conjunction with the rules and procedures of the Certificate Authority (CA). The system allows the CA to confirm that compliance has been achieved and maintained in accordance with the requirements of the product definition and standard products in accordance with the relevant technical specifications by an Original Component Manufacturer (OCM).
AS-9134, “Supply Chain Risk Management Guide”:
The Guide focuses on Quality as an important risk assessment factor, taking into account all aspects of Quality that are directly linked to global quality management. While the traditional “small q” Quality is an important element to evaluate, from a company’s business perspective, other elements play an important role in minimizing risk. This guide identifies risk factors to consider.
AS- 9162, “Aviation Operator Self Verification Programs”:
This standard is focused, as far as possible, on standardizing operator self-verification practices in the aerospace and defense industries. Establishing common requirements practices should result in improved quality and safety, reduced costs, and elimination or reduction of organization-specific requirements.
